The decking, mast, spar, blocks, rudder, belaying pins
and pretty much everything else
apart from frames and keel was scratch built.
The deck was tree nailed down to the cross beams I
installed and simulated caulking was laid between each plank.

Once all was sanded flush it was onto the side boards,
cutting in the scuppers as I went along.
The mast was a single piece of dowel,
turned to get a good taper then a single sheave
installed at the mast top.

The rigging was just some line I had
laying about in my ships spares.
The rigging blocks were carved from a single stick of spruce.