Out with me best saw and routing bits,
legs removed, skirt hollowed out,
legs extended with 2 part automotive putty and the whole deal
was then cleaned up for the paintwork.
The base and wall were just simple MDF,
sand and PVA mixture spread thinly on some plastic sheet.
Roughly divided into squares while
still damp and left to dry, then broken up into said squares.
The door and frame is balsa wood, the banding is painted plasticard,
riveting is 2 part epoxy glue with
enamel paint mixed in and just drops
applied where needed and left to cure.
The bars are mild steel rod, the key in the lock is just some beaten brass rod.