btmgi.jpg - 4930 Bytes


The wings and tail were made from wood.
The canopy was vac formed over a wood carving,
a second vac forming in clear was made to fit inside the first.

The back plate was in the kit but that got dumped and a better detailed one made.
The chrome engines were just lengths of pipe, spun and the ridges filed
into them then covered with self adhesive foil tape.

What appears to be the rear engine exhaust rings was just the
plastic patterned end of a reel of plumbers solder pushed into
Playdoh then resin poured in and repeat,
clean up, paint and install.


Image164.jpg - 46340 Bytes


btmgi.jpg - 4930 Bytes