Renwal/Revell Atomic Cannon
1/32nd Scale

Page Number
Finishing up the front...
With The Front Truck Finish!
Last deal with the lifting forks for the front truck.

Mods done, detailing sorted and paintwork a plenty!











Hydraulic lifters sorted and fitted.

Forks in place and plumbing done.



And that's pretty much a wrap for the front truck!







Onward with the rear truck!

Forks detailed, given a couple of coats of Olive Drab and the black wash treatment.

Started on the piping up prep.
Pump fitted, that and the tank given the inlet/outlets.

The hydraulic manifold is on the front of the cab, looks like this...

While certainly not to proper size, a bit big to be honest but done what I can with what I got.

Painted, black washed and in place.




Tool rack on the front cab also.
Ref pic.

.25mm sheet styrene sliced up, glued up, painted and done.

The required dry fit look see of course.

Now couldn't find any details of the tools used or how they fitted in the rack so went with s bog standard set-up
of shovel, hammer, axe and pry bars.

Some print and paint work done with a dry fit look see as always.





And I like what I see.
Away to page 12 for the last bits!

Page Number